Important Note: When updating an Omnia ONE unit from version 1.1 or earlier, you must update the unit to version 1.2 first. Run v1.2 then update the unit from v1.2 to 2.2.

If you are updating your Omnia ONE from version 2.0 or later, you may simply delete the version 1.2 files after unzipping the download.

Full software update and style conversion instructions (including a summary of changes), are included in the zip file.

New Feature: Optional 5th Limiter Band

When updating an Omnia ONE unit from version 1.1 or earlier, you must update the unit to version 1.2 first. Run v1.2 then update the unit from 1.2 to 2.6.

If you are updating your Omnia ONE from version 2.0 or later, you may simply delete the version 1.2 files after unzipping the download.

Full software update and style conversion instructions (including a summary of changes), are included in the zip file.

Important Note: When updating an Omnia ONE unit from version 1.1 or earlier, you must update the unit to version 1.2 first. Run v1.2 then update the unit from v1.2 to 2.2.

If you are updating your Omnia ONE from version 2.0 or later, you may simply delete the version 1.2 files after unzipping the download.

Full software update and style conversion instructions (including a summary of changes), are included in the zip file.

Important Note: When updating an Omnia ONE unit from version 1.1 or earlier, you must update the unit to version 1.2 first. Run v1.2 then update the unit from v1.2 to 2.2.

If you are updating your Omnia ONE from version 2.0 or later, you may simply delete the version 1.2 files after unzipping the download.

Full software update and style conversion instructions (including a summary of changes), are included in the zip file.

Attention: We have removed the Omnia-6 front panel (Display) and Remote control software update version 7.3.5 due to its sluggish operation on some units. If you are experiencing this issue, please "downgrade" your Display software to FP7.2.5 or FP7.2.6cf as appropriate for your front panel hardware. (See Update Instructions) These Display software versions are fully compatible with both Release (PCMCIA card) versions 7.02.05 and 7.03.04 with the exception that Omnia-6 Software v 7.2.5 does not support EXi Diversity Delay times above 10 seconds. Please contact Support if delay times above 10 seconds are needed.

Software for older versions click here

Omnia 8x Software Update

Changes & Fixes (1.4.10d)

Improvements:

• Selecting the output stream type - LIVE, STANDARD, MEDIUM
• Web - option to change the default buffer size for Std streams
• Improved software upload procedure - accepts packages in .tar format and works faster
• Enable the ping client and sshd
• Change the factory netmask to 255.0.0.0
• Diagnostics – on connecting the remote trace reciever save selected system log files in the cfg directory on CF
• Diagnostics – indicate software update installation steps in the internal system log

Fixed:

• Insufficient buffer amount between network driver and standard Linux
• RFC incompliant host name
• Web - processing control applet: In and Out level knobs do not work, when browsing on a Linux host
• Web - configuration: cosmetic - alignment of "Status" and "Apply all" items
• On CF Type 2 units, Front Panel Passcode is lost after a restart

To check the type of motherboard your Omnia.8x uses, navigate to the System webpage of the Omnia.8x, check the "Hardware" field displaying the CPU type:

• If you see "Pentium 4", it is an Intel board and you need to use Omnia 8x for Intel Motherboards
• If you see "Core Solo T1300", it is an ASUS board and you can use this file (ends with .tbz2)
• If you see "Core2 Duo T7400", it is an Advantech board and you can use this file (ends with .tbz2)
• If you see "Core Duo T2500", it is an Advantech board and you can use this file (ends with .tbz2)

NOTE: There is a protection in the software and the unit will not accept an incompatible update package.

Omnia 8x Software Update

Changes & Fixes (1.4.10d)

Improvements:

• Selecting the output stream type - LIVE, STANDARD, MEDIUM
• Web - option to change the default buffer size for Std streams
• Improved software upload procedure - accepts packages in .tar format and works faster
• Enable the ping client and sshd
• Change the factory netmask to 255.0.0.0
• Diagnostics – on connecting the remote trace reciever save selected system log files in the cfg directory on CF
• Diagnostics – indicate software update installation steps in the internal system log

Fixed:

• Insufficient buffer amount between network driver and standard Linux
• RFC incompliant host name
• Web - processing control applet: In and Out level knobs do not work, when browsing on a Linux host
• Web - configuration: cosmetic - alignment of "Status" and "Apply all" items
• On CF Type 2 units, Front Panel Passcode is lost after a restart

To check the type of motherboard your Omnia.8x uses, navigate to the System webpage of the Omnia.8x, check the "Hardware" field displaying the CPU type:

• If you see "Pentium 4", it is an Intel board and you can use this file (ends with .tar).
• If you see "Core Solo T1300", it is an ASUS board and you need to use Omnia 8x for Advantech and Asus Motherboards.
• If you see "Core2 Duo T7400", it is an Advantech board and you need to use Omnia 8x for Advantech and Asus Motherboards.
• If you see "Core Duo T2500", it is an Advantech board and you need to use Omnia 8x for Advantech and Asus Motherboards.

NOTE: There is a protection in the software and the unit will not accept an incompatible update package.

Exciting News for A/X owners! Existing A/X users can upgrade to Omnia A/XE - Processed Audio Encoding for Windows at no charge.

• Click here to review all the added benefits of A/XE.
• Click here for details on how to upgrade to A/XE.

Read More...

Omnia-5 EX FM, 5 EX AM & 5EXi AM Remote Control Software v5.2.1 and Front Panel Update file vFP5.2.1.

NOTE: If your unit is already running Display version FP5.2.1 or FP5.2.2cf, do not use and discard the included .upd front panel update file.

The .exe file is the remote control application.

Software for older Omnia-5 AM and FM software versions: click here