(Current version for use only with Omnia-3 units (All Styles) running software release 3.05.02 (3.5.2) and and higher)

Omnia-3 AM, NET and FM Turbo Remote Software v3.5.3

Download the .EXE file to your local computer into your chosen directory. There is no installer. Simply double-click "omnia_remote_3_5_3.exe" (or create a shortcut for your desktop) to start the app. You will see a message that it created a connect.dat file inthe same directory as the .exe. Click OK. Follow the instructions in the Omnia UsersManual for operating the Remote Software. Default password for modem and serial connections is tomtom. Note: Omnia-3 Remote is for use with Omnia-3 audio processors only.

Remote software for other Omnia processors can be found on their specific product pages.

Applicable to Front Panel (Display) Software Version FP5.2.1
Motherboard DSP (Release) Software Version 5.02.01

(only for use with Omnia-3 units running software release 3.03.xx and older)

Omnia-3 AM, NET and FM Remote Software v3.3.2

1. Download the .EXE file to your local computer into your chosen directory.
2. Double click Omnia3_remote30302.exe andfollow the instructions.
3. Follow the instructions in the Omnia UsersManual for operating the Remote Software.
4. Default password for modem andserial connections is tomtom.

Note: Omnia-3 Remote is for use with Omnia-3 audio processors only. Remote software for other Omnia processors can be found on their specific product pages.

Omnia-4.5 Remote Software

Before Downloading: The remote control software operates ONLY with specific versions of Omnia-6 software. Before downloading, confirm your software version by choosing "System --> About" from the control menu.

Omnia strongly recommends keeping your Omnia-4.5 software current. Please contact Omnia Support to obtain the latest software upgrade.

Omnia-4.5 Remote is for use with Omnia-4.5 audio processors only. Remote software for other Omnia processors can be found on their specific product pages.

Omnia-4.5 Remote for v4.01.01 and newer software

Confirm your software version by choosing "System --> About" from the control menu. If your software version reads "4.1.1" (this is not a typographic error) or higher, this software is correct for your unit.

Installation Instructions:

1. Download the .EXE file to your localcomputer into your chosen directory.
2. Double click o45remote4.00.19.exe and follow the instructions.
3. Follow the instructions in the Omnia Users Manual for operating the Remote Software.
4. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.
5. Default password for Level 3 is engineer.

Instructions

1. Download the .ZIP file to your local computer into your chosen directory.

2. Extract the ZIP file and double-click Toolvox_remote_1_3.Msi to install the new remote file.

3. ToolVox Remote 1.3 will be installed to the "Omnia" folder of your Start menu.

4. Follow the instructions in the ToolVox Users Manual for operating the Remote Software.

Note:ToolVox Remote is for use with ToolVox microphone processors only. Remote software for other Omnia processors can be found on their specific product pages.

For original Omnia.fm