Omnia-5FM Front Panel Update FP5.06

Omnia-5EX front-panel software may now be updated using an Ethernet connection.

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support

Front Panel Software Update:

Once you have read the update instructions, download and unzip the file and follow the instructions in the Omnia Front Panel Software Upgrade bulletin to update your unit.

Omnia-5FM Remote Software v 5.0.2

Omnia-5EX front-panel software may now be updated using an Ethernet connection.

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support.

Remote Control Software Update:

Before Downloading: This version of remote software works with with front panel software version FP5.06, and rear panel (DSP) software version 5.0.2 only. Before downloading, confirm your software version by choosing "System --> About" from the control menu. Your software version should read "5.0.2". To obtain the latest software update, please contact Omnia Support.

Installation Instructions:

1. Download the .EXE file to your local computer into your chosen directory.
2. Double click omnia5_remote_5.0.2.exe. Follow the instructions in the Omnia Users Manual for operating the Remote Software.
3. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.
4. Default password for Level 3 is engineer.

This version of Omnia-5 Remote is for use with Omnia-5 FM audio processors only. Remote software for other Omnia processors can be found here.

Omnia-5FM Remote for v5.0.1 software

Confirm your software version by choosing "System --> About" from the control menu. If your software version reads "5.0.1" , this software is correct for your unit.

Installation Instructions:

1. Download the .EXE file to your local computer into your chosen directory.

2. Double click o5remote_5.01.exe. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

3. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

4. Default password for Level 3 is engineer.

Omnia-5AM Front Panel Update v FP5.1.0

Omnia-5EX AM front-panel software may now be updated using an Ethernet connection.

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support

Front Panel Software Update:

Once you have read the update instructions, download and unzip the file and follow the instructions outlined above to update your unit.

This front panel version must be used with Omnia-5 EX or EXi "rear panel" Release software v5.1.0.

If your unit is running earlier Release software, please contact Omnia Support to obtain a free PCMCIA update card.

Omnia-5AM Remote Software v 5.1.0

Omnia-5EX AM front-panel software may now be updated using an Ethernet connection.

Before Downloading: Please read our tech bulletin, Omnia Front Panel Software Upgrade. Follow the instructions outlined in this document; if you have questions, please contact Omnia Support.

Remote Control Software Update:

Before Downloading: This version of remote software works with with software version FP5.1.0 only. Before downloading, confirm your software version by choosing "System --> About" from the control menu. Your software version should read "5.1.0". To obtain the latest software update, please contact Omnia Support.

Installation Instructions:

1. Download the .EXE file to your local computer into your chosen directory.

2. Double click omn_remote_5.1.0.exe. Follow the instructions in the Omnia Users Manual for operating the Remote Software.

3. Default password for modem and serial connections is tomtom. The password for Ethernet connections follows the Front Panel passwords.

4. Default password for Level 3 is engineer.

This version of Omnia-5 Remote is for use with Omnia-5 AM audio processors only. Remote software for other Omnia processors can be found here.