Attention: We have removed the Omnia-6 front panel (Display) and Remote control software update version 7.3.5 due to its sluggish operation on some units. If you are experiencing this issue, please "downgrade" your Display software to FP7.2.5 or FP7.2.6cf as appropriate for your front panel hardware. (See Update Instructions) These Display software versions are fully compatible with both Release (PCMCIA card) versions 7.02.05 and 7.03.04 with the exception that Omnia-6 Software v 7.2.5 does not support EXi Diversity Delay times above 10 seconds. Please contact Support if delay times above 10 seconds are needed.

Software for older versions click here

Omnia-6 Software v 7.2.5

The Omnia-6EX / EXi front-panel (Display) software must be updated using an Ethernet remote control connection.

To make things easier for you, we are now distributing both the front panel and remote control software in a single ZIP file.

Before Downloading: This version of remote software works with with front panel (Display) software version FP7.2.5 and rear panel (Release) software version 7.2.5 only. Before downloading, confirm your software version by choosing "System --> About" from the control menu. Your "Release:" software version should read "7.2.5".

Please read our tech bulletin, Omnia-6 Front Panel Software Upgrade. Follow the instructions outlined in this document; if you need to load front panel (Display) version FP7.2.5. if you have questions, please contact Omnia Support.

Omnia strongly recommends keeping your Omnia-6 software current. To obtain the latest software, please visit the Omnia-6 software page or contact Omnia Support.

Once you have confirmed your software version, download the software. This .zip file contains both the front panel update files and the remote control program.

Omnia-6 Remote is for use with Omnia-6 audio processors only.

*Updated 07.18.09 to include omn6hd_7_2_6cf.upd for certain users that need to downgrade their front panel software from FP7.3.3.