Omnia 8x Software Update

Changes & Fixes (1.4.10d)

Improvements:

• Selecting the output stream type - LIVE, STANDARD, MEDIUM
• Web - option to change the default buffer size for Std streams
• Improved software upload procedure - accepts packages in .tar format and works faster
• Enable the ping client and sshd
• Change the factory netmask to 255.0.0.0
• Diagnostics – on connecting the remote trace reciever save selected system log files in the cfg directory on CF
• Diagnostics – indicate software update installation steps in the internal system log

Fixed:

• Insufficient buffer amount between network driver and standard Linux
• RFC incompliant host name
• Web - processing control applet: In and Out level knobs do not work, when browsing on a Linux host
• Web - configuration: cosmetic - alignment of "Status" and "Apply all" items
• On CF Type 2 units, Front Panel Passcode is lost after a restart

To check the type of motherboard your Omnia.8x uses, navigate to the System webpage of the Omnia.8x, check the "Hardware" field displaying the CPU type:

• If you see "Pentium 4", it is an Intel board and you can use this file (ends with .tar).
• If you see "Core Solo T1300", it is an ASUS board and you need to use Omnia 8x for Advantech and Asus Motherboards.
• If you see "Core2 Duo T7400", it is an Advantech board and you need to use Omnia 8x for Advantech and Asus Motherboards.
• If you see "Core Duo T2500", it is an Advantech board and you need to use Omnia 8x for Advantech and Asus Motherboards.

NOTE: There is a protection in the software and the unit will not accept an incompatible update package.